Counting in Binary

For this challenge, we modified the code that was provided so that the binary number starts in 0000 all the LEDs will be off. Then we went to 1 which was 0001 and only the first LED will blink. Then we went to 2 which was 0010 and the second LED will blink. Then we went to 3 which was 0011 and the first and the second LED will turn on. We continued this method until all numbers displayed up to 15. Below is a video of the LED lights turning on counting in binary. 

Programming Three LEDs

For A, we had to use the previous code from the challenge "Programming two LEDs" and modified it so that three LEDs may be lit up. We modified the code so that the red LED blinks first, then the green LED and finally the white LED. In the directions, it is said to use a blue LED but we had to use a white LED. Below is a video of the red LED blinking first, then the green LED and finally the white LED.

For B, We modified the previous code to make the red LED blink twice, then the green LED to blink once  and finally the blue LED to blink twice. As said previously the "blue" LED was replaced with a white LED since we had no blue LED available. Below is a video of the red LED blinking once, the green LED blinking once  and finally the blue LED  blinking twice.

For C, We modified the previous code to have the red LED blink, then the green LED, then a blue LED, and finally a green LED and we made this pattern repeat.  As said previously the "blue" LED was replaced with a white LED since we had no blue LED available. Below is a video of the red LED blinking, then the green LED, then a blue LED, and finally a green LED. 

Programming Two LEDs

In programming Two LEDs, we used the code provided to light up two LED lights on the breadboard.We added a second LED to the breadboard along with another jump wire and resistor.  Below is a video of the green and red LED light blinking on and off after each other.

We modified the provided code to have the red LED blink two times and have the green LED blink once. Below is a video of the red LED blinking twice and the green LED blink once. 

For B, We modified the provided code to make the green and red LED on for 2 seconds , then only the green LED for 2 seconds and then the red LED for 2 seconds. Below is a video of  the green and red LED on for 2 seconds , then only the green LED for 2 seconds and then the red LED for 2 seconds.

For C, We modified the provided code to make the green LED blink 3 times and then have the red LED to blink once. Below is a video of the green LED blinking 3 times and the red LED blinking once.

Programming the External LED

Using the code provided we copy and pasted the code into Arduino and began modifying the code to achieve each kind of blinking LED. 

In A, We modified the code to keep the LED on without it shutting off. Below is a video of the LED on without shutting off. 

In B, We modified the code to keep the LED off without ever going on. Below is a video of the LED staying off without turning on.

In C, We modified the code to have the LED go on for 15 seconds and then go off for 3 seconds, Below is the video of the LED staying on for 15 seconds and then going off for 3 seconds.

In D, We had to modify the code to have the LED go on for a second , then go off for a second, then on for 5 seconds and off for a second. Below is a video of the LED going on for a second , then going off for a second, then going on for 5 seconds and off for a second

Keep a Light On

Today we used the previous "blinker" code to make a red LED blink on and off. We followed all the provided steps. We had one error when attempting to get the red LED to blink, which was having the red jumper wire in the wrong hole. We plugged the jumper wire into the correct hole and we ran the "Blinker" code and the red LED began blinking. Below is a video.

Modify Blink

First, We modified the program so that the light would stay off. Below is the code we wrote to keep the Light off.

Then, we modified the original code so that the light will stay on for one second and go off for 5 seconds. Below is the code we wrote to have the light stay on for one second and stay off for 5 seconds. Below the code is a video of the Light staying on for one second and going off for 5 seconds.

Finally, we modified the program to stay on for 10 seconds and to go off for one second. Below are the modified code and Below the Modified code is the video of the light staying on for 5 seconds and going off for one second. 

Blink a Light

Today we copy and pasted the code given into the Arduino Software in order to make the yellow onboard LED next to port 13 blink on and off. We had a few errors with the code but we managed to get the code to run and the Yellow LED began blinking after we reset the computer. Below is a video of the Yellow LED blinking on and off.